Product Browser - Kyocera SGS Europe
Product Browser - Kyocera SGS Europe

Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_Z5_Drawing.jpg
Series_Z5_Logo.jpg
Series_Z5S_TA.jpg
Series_Z5TA_Logo_Vector.eps
Z-Carb-HPR_Action.jpg
https://www.youtube.com/watch?v=ZWBNmTkeSIg
https://www.youtube.com/watch?v=0BKU7y6XSvg
https://www.youtube.com/watch?v=OnYJYzFgKwI

1" Dia, 5 Flute, Square End End Mill - 37218

SERIES: Z5S

Z-Carb-HPR

1" Dia, 1-1/2" LOC, 1" Shank Dia, 5 Flute, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5S, Z-Carb-HPR, Square End End Mill - 37218

Feature & Benefits

  • An ideal balance of helix, indexing, flute depth, rake and relief
  • Variable indexing for chatter supression and patented edge geometry for shearing and strength
  • Chatter-free geometry allows deep cutting and high speed machining
  • Enhanced corner geometry with tight tolerance corner radii
  • Excels at roughing, ramping, high speed machining and finishing in a variety of materials
SKU / EDP37218
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
SeriesZ5S
Series DescriptionZ-Carb-HPR
High PerformanceYes
End ConfigurationSquare End
Tool LengthRegular
Unit (inch/mm)inch
Number of Flutes5
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)1.0000
Cutting Diameter (DC) (Fractional Inch)1
Cutting Diameter (DC) (mm)25.40
Shank Diameter (DCON) (Decimal Inch)1.0000
Shank Diameter (DCON) (Fractional Inch)1
Shank Diameter (DCON) (mm)25.40
Length of Cut (APMX) (Decimal Inch)1.5000
Length of Cut (APMX) (Fractional Inch)1-1/2
Length of Cut (APMX) (mm)38.10
Overall Length (LF) (Decimal Inch)4.0000
Overall Length (LF) (Fractional Inch)4
Overall Length (LF) (mm)101.60
Shank Length (LS) (Decimal Inch)2.5000
Shank Length (LS) (Fractional Inch)2-1/2
Shank Length (LS) (mm)63.50
Non-Cutting Center Diameter (NCD) (Decimal Inch)0.3500
Non-Cutting Center Diameter (NCD) (mm)8.89
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeWeldon (Drive Flat)
Weldon FlatYes
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)37
Variable HelixNo
Center CuttingNo
Chip BreakerNo
Alternative Products SKU / EDP to 37218
Series_55_SQ_LG_TA.jpg

1" Dia, 5 Flute, Square End End Mill - 32670

SGS 1" Dia, 1-1/2" LOC, 1" Shank Dia, 5 Flute, 45 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 55S, V-Carb, Square End End Mill - 32670

Series_Z5S_TA.jpg

1" Dia, 5 Flute, Square End End Mill - 38523

SGS 1" Dia, 1-1/2" LOC, 1" Shank Dia, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series Z5S, Z-Carb-HPR, Square End End Mill - 38523

Series_Z5S_TM.jpg

1" Dia, 5 Flute, Square End End Mill - 37130

SGS 1" Dia, 1-1/2" LOC, 1" Shank Dia, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5S, Z-Carb-HPR, Square End End Mill - 37130

Series_Z5S_TM.jpg

1" Dia, 5 Flute, Square End End Mill - 37137

SGS 1" Dia, 1-1/2" LOC, 1" Shank Dia, 5 Flute, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5S, Z-Carb-HPR, Square End End Mill - 37137

Series_Z5S_TM.jpg

1" Dia, 5 Flute, Square End End Mill - 37295

SGS 1" Dia, 1-1/2" LOC, 1" Shank Dia, 5 Flute, Coolant-Through, 37 Degree Helix, Ti-NAMITE-M (TM) Coated, Series Z5S, Z-Carb-HPR, Square End End Mill - 37295

Product enquiry form

FUTURE CRM FORM HERE