Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_Z1P_TA.jpg
Series_Z1PCR_Z1MPCR_Drawing.jpg
Series_Z1_Logo_Vector.eps
Series_Z1P_Logo.jpeg
https://www.youtube.com/watch?v=Uj183IuCnZc

3/4" Dia, 4 Flute, Corner Radius End Mill - 36870

SERIES: ZPCR

Z-Carb-AP

3/4" Dia, 1-1/2" LOC, 3/4" Shank Dia, 0.0400" Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPCR, Z-Carb-AP, Corner Radius End Mill - 36870

Feature & Benefits

  • Variable rake geometry alters and controls the cutting dynamic taking chatter suppression to an unprecedented level
  • Unequal helix design changes the cutting angle to improve harmonics
  • Unequal flute spacing helps to disrupt the rhythmic pattern created by the cutting edge helping to suppress damaging harmonics
  • Enhanced corner geometry with tight tolerance corner radii
  • Recommended for materials ≤ 45 HRc (≤ 420 Bhn)

SKU / EDP36870
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
SeriesZPCR
Series DescriptionZ-Carb-AP
High PerformanceYes
End ConfigurationCorner Radius
Tool LengthStub
Unit (inch/mm)inch
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.7500
Cutting Diameter (DC) (Fractional Inch)3/4
Cutting Diameter (DC) (mm)19.05
Shank Diameter (DCON) (Decimal Inch)0.7500
Shank Diameter (DCON) (Fractional Inch)3/4
Shank Diameter (DCON) (mm)19.05
Length of Cut (APMX) (Decimal Inch)1.5000
Length of Cut (APMX) (Fractional Inch)1-1/2
Length of Cut (APMX) (mm)38.10
Overall Length (LF) (Decimal Inch)4.0000
Overall Length (LF) (Fractional Inch)4
Overall Length (LF) (mm)101.60
Corner Radius (RE) (Decimal Inch)0.0400
Corner Radius (RE) (mm)1.02
Shank Length (LS) (Decimal Inch)2.5000
Shank Length (LS) (Fractional Inch)2-1/2
Shank Length (LS) (mm)63.50
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeWeldon (Drive Flat)
Weldon FlatYes
Coolant OptionExternal Coolant
Coating DescriptionTX (Ti-NAMITE-X)
Additional GeometryFlute Spacing Unequal / Right Hand Cut Direction (RHC)
Rake AngleVariable
Helix AngleVariable Right Spiral
Helix Angle (Degree)35-38
Variable HelixYes
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 36870
Series_ZH1_TA.jpg

3/4" Dia, 4 Flute, Corner Radius End Mill - 36577

SGS 3/4" Dia, 1-1/2" LOC, 3/4" Shank Dia, 0.0400" Radius, 4 Flute, 38-41 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series ZH1C, Z-Carb-HTA, Corner Radius End Mill - 36577

Series_ZH1_TA.jpg

3/4" Dia, 4 Flute, Corner Radius End Mill - 36560

SGS 3/4" Dia, 1-1/2" LOC, 3/4" Shank Dia, 0.0400" Radius, 4 Flute, 38-41 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series ZH1C, Z-Carb-HTA, Corner Radius End Mill - 36560

Series_Z1P_TA.jpg

3/4" Dia, 4 Flute, Corner Radius End Mill - 36862

SGS 3/4" Dia, 1-1/2" LOC, 3/4" Shank Dia, 0.0400" Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPCR, Z-Carb-AP, Corner Radius End Mill - 36862

Series_Z1P_TA.jpg

3/4" Dia, 4 Flute, Corner Radius End Mill - 36808

SGS 3/4" Dia, 1-1/2" LOC, 3/4" Shank Dia, 0.0400" Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPCR, Z-Carb-AP, Corner Radius End Mill - 36808

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.