Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

3/8" Dia, 4 Flute, Corner Radius End Mill - 36572

SERIES: ZH1C

Z-Carb-HTA

3/8" Dia, 7/8" LOC, 3/8" Shank Dia, 0.0200" Radius, 4 Flute, 38-41 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series ZH1C, Z-Carb-HTA, Corner Radius End Mill - 36572

Feature & Benefits

The original Z-Carb design with an enhanced core and higher helix suited for the demands of high temperature alloys
Unequal flute spacing helps to disrupt the rhythmic pattern created by the cutting edge helping to suppress damaging harmonics
Optimal material removal rates through increased feed and depths of cut for difficult to machine materials
Enhanced corner geometry with tight tolerance corner radii
Recommended for materials ≤ 45 HRc (≤ 420 Bhn)

SKU / EDP	36572
Category	Solid Round Tools > Milling > High Performance End Mills
Min Order Qty	1
Series	ZH1C
Series Description	Z-Carb-HTA
High Performance	Yes
End Configuration	Corner Radius
Tool Length	Regular
Unit (inch/mm)	inch
Number of Flutes	4
Primary Workpiece Material	(P) Steel\|(M) Stainless Steel\|(K) Cast Iron\|(S) High Temp Alloy
Secondary Workpiece Material	(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)	0.3750
Cutting Diameter (DC) (Fractional Inch)	3/8
Cutting Diameter (DC) (mm)	9.53
Shank Diameter (DCON) (Decimal Inch)	0.3750
Shank Diameter (DCON) (Fractional Inch)	3/8
Shank Diameter (DCON) (mm)	9.53
Length of Cut (APMX) (Decimal Inch)	0.8750
Length of Cut (APMX) (Fractional Inch)	7/8
Length of Cut (APMX) (mm)	22.23
Overall Length (LF) (Decimal Inch)	2.5000
Overall Length (LF) (Fractional Inch)	2-1/2

Overall Length (LF) (mm)	63.50
Corner Radius (RE) (Decimal Inch)	0.0200
Corner Radius (RE) (mm)	0.51
Shank Length (LS) (Decimal Inch)	1.6250
Shank Length (LS) (Fractional Inch)	1-5/8
Shank Length (LS) (mm)	41.28
Cutting Diameter (DC) Tolerance (Decimal Inch)	+0.0000/-0.0016
Cutting Diameter (DC) Tolerance (mm)	+0.000/-0.040
Shank Diameter (DCON) Tolerance (ISO)	h6
Corner Radius (RE) Tolerance (Decimal Inch)	+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)	+0.000/-0.050
Shank Type	Straight
Weldon Flat	No
Coolant Option	External Coolant
Coating Description	AlTiN (Ti-NAMITE-A)
Additional Geometry	Flute Spacing Unequal / Right Hand Cut Direction (RHC)
Rake Angle	Positive
Helix Angle	Variable Right Spiral
Helix Angle (Degree)	38-41
Variable Helix	Yes
Center Cutting	Yes
Chip Breaker	No

Alternative Products SKU / EDP to 36572

3/8" Dia, 4 Flute, Corner Radius End Mill - 36555

SGS 3/8" Dia, 7/8" LOC, 3/8" Shank Dia, 0.0200" Radius, 4 Flute, 38-41 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series ZH1C, Z-Carb-HTA, Corner Radius End Mill - 36555

3/8" Dia, 4 Flute, Corner Radius End Mill - 36856

SGS 3/8" Dia, 7/8" LOC, 3/8" Shank Dia, 0.0200" Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPCR, Z-Carb-AP, Corner Radius End Mill - 36856

3/8" Dia, 4 Flute, Corner Radius End Mill - 36864

SGS 3/8" Dia, 7/8" LOC, 3/8" Shank Dia, 0.0200" Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPCR, Z-Carb-AP, Corner Radius End Mill - 36864