Product Browser
If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.
1/4" Dia, 4 Flute, Corner Radius End Mill - 36509
SERIES: Z16C
Z-Carb
1/4" Dia, 7/16" LOC, 1/4" Shank Dia, 0.0200" Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series Z16C, Z-Carb, Corner Radius End Mill - 36509
Feature & Benefits
- Variable rake geometry alters and controls the cutting dynamic taking chatter suppression to an unprecedented level
- Unequal helix design changes the cutting angle to improve harmonics
- Unequal flute spacing helps to disrupt the rhythmic pattern created by the cutting edge helping to suppress damaging harmonics
- Enhanced corner geometry with tight tolerance corner radii
- Recommended for materials ≤ 45 HRc (≤ 420 Bhn)
SKU / EDP | 36509 |
---|---|
Category | Solid Round Tools > Milling > High Performance End Mills |
Min Order Qty | 1 |
Series | Z16C |
Series Description | Z-Carb |
High Performance | Yes |
End Configuration | Corner Radius |
Tool Length | Stub |
Unit (inch/mm) | inch |
Number of Flutes | 4 |
Primary Workpiece Material | (P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy |
Secondary Workpiece Material | (H) Hardened Materials |
Cutting Diameter (DC) (Decimal Inch) | 0.2500 |
Cutting Diameter (DC) (Fractional Inch) | 1/4 |
Cutting Diameter (DC) (mm) | 6.35 |
Shank Diameter (DCON) (Decimal Inch) | 0.2500 |
Shank Diameter (DCON) (Fractional Inch) | 1/4 |
Shank Diameter (DCON) (mm) | 6.35 |
Length of Cut (APMX) (Decimal Inch) | 0.4375 |
Length of Cut (APMX) (Fractional Inch) | 7/16 |
Length of Cut (APMX) (mm) | 11.11 |
Overall Length (LF) (Decimal Inch) | 2.0000 |
Overall Length (LF) (Fractional Inch) | 2 |
---|---|
Overall Length (LF) (mm) | 50.80 |
Corner Radius (RE) (Decimal Inch) | 0.0200 |
Corner Radius (RE) (mm) | 0.51 |
Shank Length (LS) (Decimal Inch) | 1.5630 |
Shank Length (LS) (mm) | 39.70 |
Cutting Diameter (DC) Tolerance (Decimal Inch) | +0.0000/-0.0012 |
Cutting Diameter (DC) Tolerance (mm) | +0.000/-0.030 |
Shank Diameter (DCON) Tolerance (ISO) | h6 |
Corner Radius (RE) Tolerance (Decimal Inch) | +0.0000/-0.0050 |
Corner Radius (RE) Tolerance (mm) | +0.000/-0.127 |
Shank Type | Straight |
Weldon Flat | No |
Coolant Option | External Coolant |
Coating Description | TX (Ti-NAMITE-X) |
Additional Geometry | Flute Spacing Unequal / Right Hand Cut Direction (RHC) |
Rake Angle | Variable |
Helix Angle | Variable Right Spiral |
Helix Angle (Degree) | 35-38 |
Variable Helix | Yes |
Center Cutting | Yes |
Chip Breaker | No |
Product enquiry form
FUTURE CRM FORM HERE