Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_Z1S_TA.jpg
Series_Z1_Z1M_Drawing.jpg
Z-Carb.eps
Series_Z1_Logo.jpg

7/16" Dia, 4 Flute, Square End End Mill - 36428

SERIES: Z1S

Z-Carb

7/16" Dia, 1" LOC, 7/16" Shank Dia, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series Z1S, Z-Carb, Square End End Mill - 36428

Feature & Benefits

  • Variable rake geometry alters and controls the cutting dynamic taking chatter suppression to an unprecedented level
  • Unequal helix design changes the cutting angle to improve harmonics
  • Unequal flute spacing helps to disrupt the rhythmic pattern created by the cutting edge helping to suppress damaging harmonics
  • Enhanced corner geometry with tight tolerance corner radii
  • Recommended for materials ≤ 45 HRc (≤ 420 Bhn)

SKU / EDP36428
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
SeriesZ1S
Series DescriptionZ-Carb
High PerformanceYes
End ConfigurationSquare End
Tool LengthRegular
Unit (inch/mm)inch
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.4375
Cutting Diameter (DC) (Fractional Inch)7/16
Cutting Diameter (DC) (mm)11.11
Shank Diameter (DCON) (Decimal Inch)0.4375
Shank Diameter (DCON) (Fractional Inch)7/16
Shank Diameter (DCON) (mm)11.11
Length of Cut (APMX) (Decimal Inch)1.0000
Length of Cut (APMX) (Fractional Inch)1
Length of Cut (APMX) (mm)25.40
Overall Length (LF) (Decimal Inch)2.7500
Overall Length (LF) (Fractional Inch)2-3/4
Overall Length (LF) (mm)69.85
Shank Length (LS) (Decimal Inch)1.7500
Shank Length (LS) (Fractional Inch)1-3/4
Shank Length (LS) (mm)44.45
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTX (Ti-NAMITE-X)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AngleVariable
Helix AngleVariable Right Spiral
Helix Angle (Degree)35-38
Variable HelixYes
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 36428
Series_Z1S_TA.jpg

7/16" Dia, 4 Flute, Square End End Mill - 36532

SGS 7/16" Dia, 1" LOC, 7/16" Shank Dia, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series Z1S, Z-Carb, Square End End Mill - 36532

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.