Product Browser
If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.
1/4" Dia, 4 Flute, Ball Nose End Mill - 36344
SERIES: Z1B
Z-Carb-AP
1/4" Dia, 1/2" LOC, 1/4" Shank Dia, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPB, Z-Carb-AP, Ball Nose End Mill - 36344
Feature & Benefits
- Unequal helix design reduces damaging harmonics by changing the angle at which each cutting edge enters and exits the material
- Unequal flute spacing helps to disrupt the rhythmic pattern created by the cutting edge helping to suppress damaging harmonics
- Optimal material removal rates through increased feed and depths of cut
- Ball end design ideal for finishing operations in complex workpieces
- Recommended for materials ≤ 45 HRc (≤ 420 Bhn)
SKU / EDP | 36344 |
---|---|
Category | Solid Round Tools > Milling > High Performance End Mills |
Min Order Qty | 1 |
Series | Z1B |
Series Description | Z-Carb-AP |
High Performance | Yes |
End Configuration | Ball Nose |
Tool Length | Stub |
Unit (inch/mm) | inch |
Number of Flutes | 4 |
Primary Workpiece Material | (P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy |
Secondary Workpiece Material | (H) Hardened Materials |
Cutting Diameter (DC) (Decimal Inch) | 0.2500 |
Cutting Diameter (DC) (Fractional Inch) | 1/4 |
Cutting Diameter (DC) (mm) | 6.35 |
Shank Diameter (DCON) (Decimal Inch) | 0.2500 |
Shank Diameter (DCON) (Fractional Inch) | 1/4 |
Shank Diameter (DCON) (mm) | 6.35 |
Length of Cut (APMX) (Decimal Inch) | 0.5000 |
Length of Cut (APMX) (Fractional Inch) | 1/2 |
Length of Cut (APMX) (mm) | 12.70 |
Overall Length (LF) (Decimal Inch) | 2.5000 |
Overall Length (LF) (Fractional Inch) | 2-1/2 |
---|---|
Overall Length (LF) (mm) | 63.50 |
Shank Length (LS) (Decimal Inch) | 2.0000 |
Shank Length (LS) (Fractional Inch) | 2 |
Shank Length (LS) (mm) | 50.80 |
Cutting Diameter (DC) Tolerance (Decimal Inch) | +0.0000/-0.0012 |
Cutting Diameter (DC) Tolerance (mm) | +0.000/-0.030 |
Shank Diameter (DCON) Tolerance (ISO) | h6 |
Corner Radius (RE) Tolerance (Decimal Inch) | +0.0000/-0.0006 |
Corner Radius (RE) Tolerance (mm) | +0.000/-0.015 |
Shank Type | Straight |
Weldon Flat | No |
Coolant Option | External Coolant |
Coating Description | TX (Ti-NAMITE-X) |
Additional Geometry | Flute Spacing Unequal / Right Hand Cut Direction (RHC) |
Rake Angle | Variable |
Helix Angle | Variable Right Spiral |
Helix Angle (Degree) | 35-38 |
Variable Helix | Yes |
Center Cutting | Yes |
Chip Breaker | No |
Product enquiry form
FUTURE CRM FORM HERE