Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_43CR_43MCR_Drawing.jpg
Series_43_CR_TB.png
Series_43_Logo_Vector.eps
Series_43_47_Logo.jpg

1" Dia, 3 Flute, Corner Radius End Mill - 35734

SERIES: 43CR

S-Carb

1" Dia, 1-1/4" LOC, 1" Shank Dia, 0.1200" Radius, 3 Flute, 38 Degree Helix, Ti-NAMITE-B (TIB2) Coated, Series 43CR, S-Carb, Corner Radius End Mill - 35734

Feature & Benefits

  • Circular land allows for increased control at various speed and feed rates and reduces chatter
  • Symmetrical end gashing for excellent balance at high speeds and aggressive plunging capability
  • Open fluting for deep slotting and profiling
  • Enhanced corner geometry with tight tolerance corner radii
  • Recommended for materials ≤ 150 Bhn (≤ 7 HRc)

SKU / EDP35734
CategorySolid Round Tools > Milling > High Performance Aluminum End Mills
Min Order Qty1
Series43CR
Series DescriptionS-Carb
High PerformanceYes
End ConfigurationCorner Radius
Tool LengthStub
Unit (inch/mm)inch
Number of Flutes3
Primary Workpiece Material(N) Non-Ferrous Materials
Secondary Workpiece MaterialPlastics & Composites
Cutting Diameter (DC) (Decimal Inch)1.0000
Cutting Diameter (DC) (Fractional Inch)1
Cutting Diameter (DC) (mm)25.40
Shank Diameter (DCON) (Decimal Inch)1.0000
Shank Diameter (DCON) (Fractional Inch)1
Shank Diameter (DCON) (mm)25.40
Length of Cut (APMX) (Decimal Inch)1.2500
Length of Cut (APMX) (Fractional Inch)1-1/4
Length of Cut (APMX) (mm)31.75
Overall Length (LF) (Decimal Inch)5.0000
Overall Length (LF) (Fractional Inch)5
Overall Length (LF) (mm)127.00
Corner Radius (RE) (Decimal Inch)0.1200
Corner Radius (RE) (mm)3.05
Shank Length (LS) (Decimal Inch)3.3750
Shank Length (LS) (Fractional Inch)3-3/8
Shank Length (LS) (mm)85.73
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.00051
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.013
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTIB2 (Ti-NAMITE-B)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)38
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 35734
Series_43_CR_TB.png

1" Dia, 3 Flute, Corner Radius End Mill - 35644

SGS 1" Dia, 1-1/4" LOC, 1" Shank Dia, 0.1200" Radius, 3 Flute, 38 Degree Helix, Uncoated, Series 43CR, S-Carb, Corner Radius End Mill - 35644

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.