Product Browser
If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.
1" Dia, 6 Flute, Corner Radius End Mill - 35191
SERIES: 51CR
T-Carb
1" Dia, 1-1/4" LOC, 3-3/8" Reach, 1" Shank Dia, 0.2500" Radius, 6 Flute, 41 Degree Helix, Ti-NAMITE-X (TX) Coated, Series 51CR, T-Carb, Corner Radius End Mill - 35191
Feature & Benefits
- Engineered for High Speed Milling using Trochoidal and Peel Milling techniques
- Eccentric relief provides superior strength and smoother surface finish
- Necked design with blended diameter transitions provide clearance to reach
- Enhanced corner geometry with tight tolerance corner radii
- Recommended for materials ≤ 45 HRc (≤ 420 Bhn)
SKU / EDP | 35191 |
---|---|
Category | Solid Round Tools > Milling > High Performance End Mills |
Min Order Qty | 1 |
Series | 51CR |
Series Description | T-Carb |
High Performance | Yes |
End Configuration | Corner Radius |
Tool Length | Long Reach Neck |
Unit (inch/mm) | inch |
Number of Flutes | 6 |
Primary Workpiece Material | (P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy |
Secondary Workpiece Material | (H) Hardened Materials |
Cutting Diameter (DC) (Decimal Inch) | 1.0000 |
Cutting Diameter (DC) (Fractional Inch) | 1 |
Cutting Diameter (DC) (mm) | 25.40 |
Shank Diameter (DCON) (Decimal Inch) | 1.0000 |
Shank Diameter (DCON) (Fractional Inch) | 1 |
Shank Diameter (DCON) (mm) | 25.40 |
Length of Cut (APMX) (Decimal Inch) | 1.2500 |
Length of Cut (APMX) (Fractional Inch) | 1-1/4 |
Length of Cut (APMX) (mm) | 31.75 |
Reach (LU) (Decimal Inch) | 3.3750 |
Reach (LU) (Fractional Inch) | 3-3/8 |
Reach (LU) (mm) | 85.73 |
Overall Length (LF) (Decimal Inch) | 6.0000 |
Overall Length (LF) (Fractional Inch) | 6 |
---|---|
Overall Length (LF) (mm) | 152.40 |
Neck Diameter (DN) (Decimal Inch) | 0.9500 |
Neck Diameter (DN) (mm) | 24.13 |
Corner Radius (RE) (Decimal Inch) | 0.2500 |
Corner Radius (RE) (mm) | 6.35 |
Shank Length (LS) (Decimal Inch) | 2.6250 |
Shank Length (LS) (Fractional Inch) | 2-5/8 |
Shank Length (LS) (mm) | 66.68 |
Cutting Diameter (DC) Tolerance (Decimal Inch) | +0.0000/-0.0020 |
Cutting Diameter (DC) Tolerance (mm) | +0.000/-0.050 |
Shank Diameter (DCON) Tolerance (ISO) | h6 |
Corner Radius (RE) Tolerance (Decimal Inch) | +0.0000/-0.0020 |
Corner Radius (RE) Tolerance (mm) | +0.000/-0.050 |
Shank Type | Straight |
Weldon Flat | No |
Coolant Option | External Coolant |
Coating Description | TX (Ti-NAMITE-X) |
Additional Geometry | Right Hand Cut Direction (RHC) |
Rake Angle | Positive |
Helix Angle | Right Spiral |
Helix Angle (Degree) | 41 |
Variable Helix | No |
Center Cutting | Yes |
Chip Breaker | No |
Product enquiry form
FUTURE CRM FORM HERE