Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_51_Logo.jpg
Series_51LC_51MLC_Drawing.jpg
Series_51LC_TX.png
Series_51_Logo_Vector.eps
https://www.youtube.com/watch?v=U_cVjG1TjfA

1" Dia, 6 Flute, Corner Radius End Mill - 35139

SERIES: 51CR

T-Carb

1" Dia, 1-1/4" LOC, 3-3/8" Reach, 1" Shank Dia, 0.0300" Radius, 6 Flute, 41 Degree Helix, Ti-NAMITE-X (TX) Coated, Series 51CR, T-Carb, Corner Radius End Mill - 35139

Feature & Benefits

  • Engineered for High Speed Milling using Trochoidal and Peel Milling techniques
  • Eccentric relief provides superior strength and smoother surface finish
  • Necked design with blended diameter transitions provide clearance to reach
  • Enhanced corner geometry with tight tolerance corner radii
  • Recommended for materials ≤ 45 HRc (≤ 420 Bhn)

SKU / EDP35139
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
Series51CR
Series DescriptionT-Carb
High PerformanceYes
End ConfigurationCorner Radius
Tool LengthLong Reach Neck
Unit (inch/mm)inch
Number of Flutes6
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)1.0000
Cutting Diameter (DC) (Fractional Inch)1
Cutting Diameter (DC) (mm)25.40
Shank Diameter (DCON) (Decimal Inch)1.0000
Shank Diameter (DCON) (Fractional Inch)1
Shank Diameter (DCON) (mm)25.40
Length of Cut (APMX) (Decimal Inch)1.2500
Length of Cut (APMX) (Fractional Inch)1-1/4
Length of Cut (APMX) (mm)31.75
Reach (LU) (Decimal Inch)3.3750
Reach (LU) (Fractional Inch)3-3/8
Reach (LU) (mm)85.73
Overall Length (LF) (Decimal Inch)6.0000
Overall Length (LF) (Fractional Inch)6
Overall Length (LF) (mm)152.40
Neck Diameter (DN) (Decimal Inch)0.9500
Neck Diameter (DN) (mm)24.13
Corner Radius (RE) (Decimal Inch)0.0300
Corner Radius (RE) (mm)0.76
Shank Length (LS) (Decimal Inch)2.6250
Shank Length (LS) (Fractional Inch)2-5/8
Shank Length (LS) (mm)66.68
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTX (Ti-NAMITE-X)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)41
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.