Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_43CR_43MCR_Drawing.jpg
Series_43_CR_TB.png
Series_43_Logo_Vector.eps
Series_43_47_Logo.jpg

5/8" Dia, 3 Flute, Corner Radius End Mill - 34783

SERIES: 43CR

S-Carb

5/8" Dia, 1-5/8" LOC, 5/8" Shank Dia, 0.0600" Radius, 3 Flute, 38 Degree Helix, Uncoated, Series 43CR, S-Carb, Corner Radius End Mill - 34783

Feature & Benefits

  • Circular land allows for increased control at various speed and feed rates and reduces chatter
  • Symmetrical end gashing for excellent balance at high speeds and aggressive plunging capability
  • Open fluting for deep slotting and profiling
  • Enhanced corner geometry with tight tolerance corner radii
  • Recommended for materials ≤ 150 Bhn (≤ 7 HRc)

SKU / EDP34783
CategorySolid Round Tools > Milling > High Performance Aluminum End Mills
Min Order Qty1
Series43CR
Series DescriptionS-Carb
High PerformanceYes
End ConfigurationCorner Radius
Tool LengthRegular
Unit (inch/mm)inch
Number of Flutes3
Primary Workpiece Material(N) Non-Ferrous Materials
Secondary Workpiece MaterialPlastics & Composites
Cutting Diameter (DC) (Decimal Inch)0.6250
Cutting Diameter (DC) (Fractional Inch)5/8
Cutting Diameter (DC) (mm)15.88
Shank Diameter (DCON) (Decimal Inch)0.6250
Shank Diameter (DCON) (Fractional Inch)5/8
Shank Diameter (DCON) (mm)15.88
Length of Cut (APMX) (Decimal Inch)1.6250
Length of Cut (APMX) (Fractional Inch)1-5/8
Length of Cut (APMX) (mm)41.28
Overall Length (LF) (Decimal Inch)3.7500
Overall Length (LF) (Fractional Inch)3-3/4
Overall Length (LF) (mm)95.25
Corner Radius (RE) (Decimal Inch)0.0600
Corner Radius (RE) (mm)1.52
Shank Length (LS) (Decimal Inch)2.1250
Shank Length (LS) (Fractional Inch)2-1/8
Shank Length (LS) (mm)53.98
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.00043
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.011
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionBright/Uncoated
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)38
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 34783
Series_43_CR_TB.png

5/8" Dia, 3 Flute, Corner Radius End Mill - 34805

SGS 5/8" Dia, 1-5/8" LOC, 5/8" Shank Dia, 0.0600" Radius, 3 Flute, 38 Degree Helix, Ti-NAMITE-B (TIB2) Coated, Series 43CR, S-Carb, Corner Radius End Mill - 34805

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.