Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_47_47M_Drawing.jpg
Series_47_TB.jpg
Series_43_Logo_Vector.eps
Series_43_47_Logo.jpg

1/2" Dia, 2 Flute, Square End End Mill - 34665

SERIES: 47

S-Carb

1/2" Dia, 1-1/4" LOC, 1/2" Shank Dia, 2 Flute, 35 Degree Helix, Ti-NAMITE-B (TIB2) Coated, Series 47, S-Carb, Square End End Mill - 34665

Feature & Benefits

  • Circular land reduces edge aggressiveness for varied speed and feed rates
  • 2 Flutes effectively manage the large size and volume of chips produced during the aggressive machining process
  • Excellent balance at high speeds and aggressive plunging capability
  • Recommended for materials ≤ 150 Bhn (≤ 7 HRc)

SKU / EDP34665
CategorySolid Round Tools > Milling > High Performance Aluminum End Mills
Min Order Qty1
Series47
Series DescriptionS-Carb
High PerformanceYes
End ConfigurationSquare End
Tool LengthRegular
Unit (inch/mm)inch
Number of Flutes2
Primary Workpiece Material(N) Non-Ferrous Materials
Secondary Workpiece MaterialPlastics & Composites
Cutting Diameter (DC) (Decimal Inch)0.5000
Cutting Diameter (DC) (Fractional Inch)1/2
Cutting Diameter (DC) (mm)12.70
Shank Diameter (DCON) (Decimal Inch)0.5000
Shank Diameter (DCON) (Fractional Inch)1/2
Shank Diameter (DCON) (mm)12.70
Length of Cut (APMX) (Decimal Inch)1.2500
Length of Cut (APMX) (Fractional Inch)1-1/4
Length of Cut (APMX) (mm)31.75
Overall Length (LF) (Decimal Inch)3.2500
Overall Length (LF) (Fractional Inch)3-1/4
Overall Length (LF) (mm)82.55
Shank Length (LS) (Decimal Inch)2.0000
Shank Length (LS) (Fractional Inch)2
Shank Length (LS) (mm)50.80
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.00043
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.011
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTIB2 (Ti-NAMITE-B)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)35
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 34665
Series_44_TB.jpg

1/2" Dia, 2 Flute, Square End End Mill - 34516

SGS 1/2" Dia, 1-1/4" LOC, 1/2" Shank Dia, 2 Flute, 45 Degree Helix, Ti-NAMITE-B (TIB2) Coated, Series 44S, Ski-Carb, Square End End Mill - 34516

Series_44_TB.jpg

1/2" Dia, 2 Flute, Square End End Mill - 32040

SGS 1/2" Dia, 1-1/4" LOC, 1/2" Shank Dia, 2 Flute, 45 Degree Helix, Uncoated, Series 44S, Ski-Carb, Square End End Mill - 32040

Series_44_TB.jpg

1/2" Dia, 2 Flute, Square End End Mill - 34515

SGS 1/2" Dia, 1-1/4" LOC, 1/2" Shank Dia, 2 Flute, 45 Degree Helix, Uncoated, Series 44S, Ski-Carb, Square End End Mill - 34515

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.