Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_44_45_Logo.jpg
Series_44_44M_Drawing.jpg
Series_44_TB.jpg
Series_44_45_Logo_Vector.eps

3/4" Dia, 2 Flute, Square End End Mill - 34530

SERIES: 44S

Ski-Carb

3/4" Dia, 4" LOC, 3/4" Shank Dia, 2 Flute, 45 Degree Helix, Ti-NAMITE-B (TIB2) Coated, Series 44S, Ski-Carb, Square End End Mill - 34530

Feature & Benefits

  • Polished ski land with primary and secondary flute wall design minimizes chip interference by directing chips away from secondary flute
  • Circular land allows for increased control at various speed and feed rates ultimately reducing chatter
  • Recommended for materials ≤ 150 Bhn (≤ 7 HRc)

SKU / EDP34530
CategorySolid Round Tools > Milling > High Performance Aluminum End Mills
Min Order Qty1
Series44S
Series DescriptionSki-Carb
High PerformanceYes
End ConfigurationSquare End
Tool LengthExtra Long
Unit (inch/mm)inch
Number of Flutes2
Primary Workpiece Material(N) Non-Ferrous Materials
Secondary Workpiece MaterialPlastics & Composites
Cutting Diameter (DC) (Decimal Inch)0.7500
Cutting Diameter (DC) (Fractional Inch)3/4
Cutting Diameter (DC) (mm)19.05
Shank Diameter (DCON) (Decimal Inch)0.7500
Shank Diameter (DCON) (Fractional Inch)3/4
Shank Diameter (DCON) (mm)19.05
Length of Cut (APMX) (Decimal Inch)4.0000
Length of Cut (APMX) (Fractional Inch)4
Length of Cut (APMX) (mm)101.60
Overall Length (LF) (Decimal Inch)6.2500
Overall Length (LF) (Fractional Inch)6-1/4
Overall Length (LF) (mm)158.75
Shank Length (LS) (Decimal Inch)2.2500
Shank Length (LS) (Fractional Inch)2-1/4
Shank Length (LS) (mm)57.15
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.00051
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.013
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeWeldon (Drive Flat)
Weldon FlatYes
Coolant OptionExternal Coolant
Coating DescriptionTIB2 (Ti-NAMITE-B)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)45
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 34530
Series_44_TB.jpg

3/4" Dia, 2 Flute, Square End End Mill - 32067

SGS 3/4" Dia, 4" LOC, 3/4" Shank Dia, 2 Flute, 45 Degree Helix, Ti-NAMITE-B (TIB2) Coated, Series 44S, Ski-Carb, Square End End Mill - 32067

Series_44_TB.jpg

3/4" Dia, 2 Flute, Square End End Mill - 32047

SGS 3/4" Dia, 4" LOC, 3/4" Shank Dia, 2 Flute, 45 Degree Helix, Uncoated, Series 44S, Ski-Carb, Square End End Mill - 32047

Series_44_TB.jpg

3/4" Dia, 2 Flute, Square End End Mill - 34529

SGS 3/4" Dia, 4" LOC, 3/4" Shank Dia, 2 Flute, 45 Degree Helix, Uncoated, Series 44S, Ski-Carb, Square End End Mill - 34529

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.