Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_APF_UN.jpg
Series_43APF_43MAPF_Drawing.jpg
APF Logo 002.eps
Series_APF_Logo.jpg

3/4" Dia, 4 Flute, Corner Radius End Mill - 34027

SERIES: APF

S-Carb APF

3/4" Dia, 1-7/8" LOC, 3/4" Shank Dia, 0.1200" Radius, 4 Flute, Coolant-Through, 41 Degree Helix, Ti-NAMITE-B (TIB2) Coated, Series APF, S-Carb APF, Corner Radius End Mill - 34027

Feature & Benefits

  • Ultra high-productivity finisher for Aluminum alloys, specifically for aircraft components
  • Two levels of chatter suppression: variable helix and indexing
  • Designed for single axial pass semi-finishing and finishing
  • Polished flutes maximize chip evacuation and provides enhanced finish
  • Recommended for materials ≤ 150 Bhn (≤ 7 HRc)

SKU / EDP34027
CategorySolid Round Tools > Milling > High Performance Aluminum End Mills
Min Order Qty1
SeriesAPF
Series DescriptionS-Carb APF
High PerformanceYes
End ConfigurationCorner Radius
Tool LengthRegular
Unit (inch/mm)inch
Number of Flutes4
Primary Workpiece Material(N) Non-Ferrous Materials
Cutting Diameter (DC) (Decimal Inch)0.7500
Cutting Diameter (DC) (Fractional Inch)3/4
Cutting Diameter (DC) (mm)19.05
Shank Diameter (DCON) (Decimal Inch)0.7500
Shank Diameter (DCON) (Fractional Inch)3/4
Shank Diameter (DCON) (mm)19.05
Length of Cut (APMX) (Decimal Inch)1.8750
Length of Cut (APMX) (Fractional Inch)1-7/8
Length of Cut (APMX) (mm)47.63
Overall Length (LF) (Decimal Inch)4.2500
Overall Length (LF) (Fractional Inch)4-1/4
Overall Length (LF) (mm)107.95
Neck Diameter (DN) (Decimal Inch)0.7280
Neck Diameter (DN) (mm)18.49
Corner Radius (RE) (Decimal Inch)0.1200
Corner Radius (RE) (mm)3.05
Shank Length (LS) (Decimal Inch)2.3750
Shank Length (LS) (Fractional Inch)2-3/8
Shank Length (LS) (mm)60.33
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0004/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.010/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0012
Corner Radius (RE) Tolerance (mm)+0.000/-0.030
Shank TypeStraight
Weldon FlatNo
Coolant OptionInternal Coolant
Coating DescriptionTIB2 (Ti-NAMITE-B)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)38/41
Variable HelixYes
Center CuttingYes
Chip BreakerNo

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.