Product Browser - Kyocera SGS Europe
Product Browser - Kyocera SGS Europe

Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_43LCB_Drawing.jpg
Series_43LCB_TB.png
Series_43_Logo_Vector.eps
Series_43_47_Logo.jpg

3/4" Dia, 3 Flute, Chip Breaker Corner Radius End Mill - 33561

SERIES: 43CB

S-Carb

3/4" Dia, 1" LOC, 3-3/8" Reach, 3/4" Shank Dia, 0.0300" Radius, 3 Flute, 38 Degree Helix, Ti-NAMITE-B (TIB2) Coated, Series 43CB, S-Carb, Chip Breaker Corner Radius End Mill - 33561

Feature & Benefits

  • Circular land allows for increased control at various speed and feed rates and reduces chatter
  • Symmetrical end gashing for excellent balance at high speeds and aggressive plunging capability
  • Chip breakers reduce machine loads up to 15% for increased roughing feed rate capability
  • Open fluting for deep slotting and profiling
  • Necked design with blended diameter transitions provide clearance to reach
  • Recommended for materials ≤ 150 Bhn (≤ 7 HRc)
SKU / EDP33561
CategorySolid Round Tools > Milling > High Performance Aluminum End Mills
Min Order Qty1
Series43CB
Series DescriptionS-Carb
High PerformanceYes
End ConfigurationChip Breaker (CR)
Tool LengthLong Reach Neck
Unit (inch/mm)inch
Number of Flutes3
Primary Workpiece Material(N) Non-Ferrous Materials
Secondary Workpiece MaterialPlastics & Composites
Cutting Diameter (DC) (Decimal Inch)0.7500
Cutting Diameter (DC) (Fractional Inch)3/4
Cutting Diameter (DC) (mm)19.05
Shank Diameter (DCON) (Decimal Inch)0.7500
Shank Diameter (DCON) (Fractional Inch)3/4
Shank Diameter (DCON) (mm)19.05
Length of Cut (APMX) (Decimal Inch)1.0000
Length of Cut (APMX) (Fractional Inch)1
Length of Cut (APMX) (mm)25.40
Reach (LU) (Decimal Inch)3.3750
Reach (LU) (Fractional Inch)3-3/8
Reach (LU) (mm)85.73
Overall Length (LF) (Decimal Inch)6.0000
Overall Length (LF) (Fractional Inch)6
Overall Length (LF) (mm)152.40
Neck Diameter (DN) (Decimal Inch)0.7300
Neck Diameter (DN) (mm)18.54
Corner Radius (RE) (Decimal Inch)0.0300
Corner Radius (RE) (mm)0.76
Shank Length (LS) (Decimal Inch)2.6250
Shank Length (LS) (Fractional Inch)2-5/8
Shank Length (LS) (mm)66.68
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.00051
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.013
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTIB2 (Ti-NAMITE-B)
Additional GeometryChip Breaker / Right Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)38
Variable HelixNo
Center CuttingYes
Chip BreakerYes
Alternative Products SKU / EDP to 33561
Series_43LC_TB.png

3/4" Dia, 3 Flute, Corner Radius End Mill - 32863

SGS 3/4" Dia, 1" LOC, 3-3/8" Reach, 3/4" Shank Dia, 0.0300" Radius, 3 Flute, 38 Degree Helix, Ti-NAMITE-B (TIB2) Coated, Series 43LC, S-Carb, Corner Radius End Mill - 32863

Series_43LC_TB.png

3/4" Dia, 3 Flute, Corner Radius End Mill - 32799

SGS 3/4" Dia, 1" LOC, 3-3/8" Reach, 3/4" Shank Dia, 0.0300" Radius, 3 Flute, 38 Degree Helix, Uncoated, Series 43LC, S-Carb, Corner Radius End Mill - 32799

Series_43LCB_TB.png

3/4" Dia, 3 Flute, Chip Breaker Corner Radius End Mill - 33521

SGS 3/4" Dia, 1" LOC, 3-3/8" Reach, 3/4" Shank Dia, 0.0300" Radius, 3 Flute, 38 Degree Helix, Uncoated, Series 43CB, S-Carb, Chip Breaker Corner Radius End Mill - 33521

Product enquiry form

FUTURE CRM FORM HERE