Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_3_3M_Drawing.jpg
Series_3EL_UN.jpg

3/4" Dia, 2 Flute, Square End End Mill - 33335

SERIES: E3S

General Application End Mill

3/4" Dia, 3" LOC, 3/4" Shank Dia, 2 Flute, 30 Degree Helix, Uncoated, Series E3S, Square End End Mill - 33335


SKU / EDP33335
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
SeriesE3S
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationSquare End
Tool LengthLong
Unit (inch/mm)inch
Number of Flutes2
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.7500
Cutting Diameter (DC) (Fractional Inch)3/4
Cutting Diameter (DC) (mm)19.05
Shank Diameter (DCON) (Decimal Inch)0.7500
Shank Diameter (DCON) (Fractional Inch)3/4
Shank Diameter (DCON) (mm)19.05
Length of Cut (APMX) (Decimal Inch)3.0000
Length of Cut (APMX) (Fractional Inch)3
Length of Cut (APMX) (mm)76.20
Overall Length (LF) (Decimal Inch)6.0000
Overall Length (LF) (Fractional Inch)6
Overall Length (LF) (mm)152.40
Shank Length (LS) (Decimal Inch)2.2750
Shank Length (LS) (mm)57.79
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionBright/Uncoated
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 33335
Series_3EL_TA.png

3/4" Dia, 2 Flute, Square End End Mill - 31966

SGS 3/4" Dia, 3" LOC, 3/4" Shank Dia, 2 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series E3S, Square End End Mill - 31966

Series_3EL_TC.png

3/4" Dia, 2 Flute, Square End End Mill - 31956

SGS 3/4" Dia, 3" LOC, 3/4" Shank Dia, 2 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series E3S, Square End End Mill - 31956

Series_3EL_TN.png

3/4" Dia, 2 Flute, Square End End Mill - 31946

SGS 3/4" Dia, 3" LOC, 3/4" Shank Dia, 2 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series E3S, Square End End Mill - 31946

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.