Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_1_1M_Drawing.jpg
Series_1EL_UN.jpg

1/8" Dia, 4 Flute, Square End End Mill - 33143

SERIES: E1S

General Application End Mill

1/8" Dia, 1" LOC, 1/8" Shank Dia, 4 Flute, 30 Degree Helix, Uncoated, Series E1S, Square End End Mill - 33143


SKU / EDP33143
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
SeriesE1S
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationSquare End
Tool LengthExtra Long
Unit (inch/mm)inch
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.1250
Cutting Diameter (DC) (Fractional Inch)1/8
Cutting Diameter (DC) (mm)3.18
Shank Diameter (DCON) (Decimal Inch)0.1250
Shank Diameter (DCON) (Fractional Inch)1/8
Shank Diameter (DCON) (mm)3.18
Length of Cut (APMX) (Decimal Inch)1.0000
Length of Cut (APMX) (Fractional Inch)1
Length of Cut (APMX) (mm)25.40
Overall Length (LF) (Decimal Inch)3.0000
Overall Length (LF) (Fractional Inch)3
Overall Length (LF) (mm)76.20
Shank Length (LS) (Decimal Inch)2.0000
Shank Length (LS) (Fractional Inch)2
Shank Length (LS) (mm)50.80
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionBright/Uncoated
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 33143
Series_1EL_TA.png

1/8" Dia, 4 Flute, Square End End Mill - 31880

SGS 1/8" Dia, 1" LOC, 1/8" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series E1S, Square End End Mill - 31880

Series_1EL_L_TC.png

1/8" Dia, 4 Flute, Square End End Mill - 31870

SGS 1/8" Dia, 1" LOC, 1/8" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series E1S, Square End End Mill - 31870

Series_1EL_L_TN.png

1/8" Dia, 4 Flute, Square End End Mill - 31860

SGS 1/8" Dia, 1" LOC, 1/8" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series E1S, Square End End Mill - 31860

Series_1EL_UN.jpg

1/8" Dia, 4 Flute, Square End End Mill - 93334

SGS 1/8" Dia, 1" LOC, 1/8" Shank Dia, 4 Flute, 30 Degree Helix, Amorphous Diamond Coated, Series E1S, Square End End Mill - 93334

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.