Product Browser
If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.
1" Dia, 3 Flute, Corner Radius End Mill - 32868
SERIES: 43LC
S-Carb
1" Dia, 1-1/4" LOC, 2-3/8" Reach, 1" Shank Dia, 0.0600" Radius, 3 Flute, 38 Degree Helix, Ti-NAMITE-B (TIB2) Coated, Series 43LC, S-Carb, Corner Radius End Mill - 32868
Feature & Benefits
- Circular land allows for increased control at various speed and feed rates and reduces chatter
- Symmetrical end gashing for excellent balance at high speeds and aggressive plunging capability
- Open fluting for deep slotting and profiling
- Necked design with blended diameter transitions provide clearance to reach
- Enhanced corner geometry with tight tolerance corner radii
- Recommended for materials ≤ 150 Bhn (≤ 7 HRc)
| SKU / EDP | 32868 |
|---|---|
| Category | Solid Round Tools > Milling > High Performance Aluminum End Mills |
| Min Order Qty | 1 |
| Series | 43LC |
| Series Description | S-Carb |
| High Performance | Yes |
| End Configuration | Corner Radius |
| Tool Length | Stub |
| Unit (inch/mm) | inch |
| Number of Flutes | 3 |
| Primary Workpiece Material | (N) Non-Ferrous Materials |
| Secondary Workpiece Material | Plastics & Composites |
| Cutting Diameter (DC) (Decimal Inch) | 1.0000 |
| Cutting Diameter (DC) (Fractional Inch) | 1 |
| Cutting Diameter (DC) (mm) | 25.40 |
| Shank Diameter (DCON) (Decimal Inch) | 1.0000 |
| Shank Diameter (DCON) (Fractional Inch) | 1 |
| Shank Diameter (DCON) (mm) | 25.40 |
| Length of Cut (APMX) (Decimal Inch) | 1.2500 |
| Length of Cut (APMX) (Fractional Inch) | 1-1/4 |
| Length of Cut (APMX) (mm) | 31.75 |
| Reach (LU) (Decimal Inch) | 2.3750 |
| Reach (LU) (Fractional Inch) | 2-3/8 |
| Reach (LU) (mm) | 60.33 |
| Overall Length (LF) (Decimal Inch) | 6.0000 |
| Overall Length (LF) (Fractional Inch) | 6 |
|---|---|
| Overall Length (LF) (mm) | 152.40 |
| Neck Diameter (DN) (Decimal Inch) | 0.9800 |
| Neck Diameter (DN) (mm) | 24.89 |
| Corner Radius (RE) (Decimal Inch) | 0.0600 |
| Corner Radius (RE) (mm) | 1.52 |
| Shank Length (LS) (Decimal Inch) | 4.7500 |
| Shank Length (LS) (Fractional Inch) | 4-3/4 |
| Shank Length (LS) (mm) | 120.65 |
| Cutting Diameter (DC) Tolerance (Decimal Inch) | +0.0000/-0.00051 |
| Cutting Diameter (DC) Tolerance (mm) | +0.000/-0.013 |
| Shank Diameter (DCON) Tolerance (ISO) | h6 |
| Corner Radius (RE) Tolerance (Decimal Inch) | +0.0000/-0.0020 |
| Corner Radius (RE) Tolerance (mm) | +0.000/-0.050 |
| Shank Type | Straight |
| Weldon Flat | No |
| Coolant Option | External Coolant |
| Coating Description | TIB2 (Ti-NAMITE-B) |
| Additional Geometry | Right Hand Cut Direction (RHC) |
| Rake Angle | Positive |
| Helix Angle | Right Spiral |
| Helix Angle (Degree) | 38 |
| Variable Helix | No |
| Center Cutting | Yes |
| Chip Breaker | No |
Alternative Products SKU / EDP to 32868
1" Dia, 3 Flute, Corner Radius End Mill - 32804
SGS 1" Dia, 1-1/4" LOC, 2-3/8" Reach, 1" Shank Dia, 0.0600" Radius, 3 Flute, 38 Degree Helix, Uncoated, Series 43LC, S-Carb, Corner Radius End Mill - 32804
1" Dia, 3 Flute, Corner Radius End Mill - 32804
SGS 1" Dia, 1-1/4" LOC, 2-3/8" Reach, 1" Shank Dia, 0.0600" Radius, 3 Flute, 38 Degree Helix, Uncoated, Series 43LC, S-Carb, Corner Radius End Mill - 32804
Product enquiry form
FUTURE CRM FORM HERE
