Product Browser
If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.
3/16" Dia, 3 Flute, Square End End Mill - 32701
SERIES: 43LS
S-Carb
3/16" Dia, 5/32" LOC, 0.4370" Reach, 3/16" Shank Dia, 3 Flute, 38 Degree Helix, Uncoated, Series 43LS, S-Carb, Square End End Mill - 32701
Feature & Benefits
- Circular land allows for increased control at various speed and feed rates and reduces chatter
- Symmetrical end gashing for excellent balance at high speeds and aggressive plunging capability
- Open fluting for deep slotting and profiling
- Necked design with blended diameter transitions provide clearance to reach
- Enhanced corner geometry with tight tolerance corner radii
- Recommended for materials ≤ 150 Bhn (≤ 7 HRc)
| SKU / EDP | 32701 |
|---|---|
| Category | Solid Round Tools > Milling > High Performance Aluminum End Mills |
| Min Order Qty | 1 |
| Series | 43LS |
| Series Description | S-Carb |
| High Performance | Yes |
| End Configuration | Square End |
| Tool Length | Stub |
| Unit (inch/mm) | inch |
| Number of Flutes | 3 |
| Primary Workpiece Material | (N) Non-Ferrous Materials |
| Secondary Workpiece Material | Plastics & Composites |
| Cutting Diameter (DC) (Decimal Inch) | 0.1875 |
| Cutting Diameter (DC) (Fractional Inch) | 3/16 |
| Cutting Diameter (DC) (mm) | 4.76 |
| Shank Diameter (DCON) (Decimal Inch) | 0.1875 |
| Shank Diameter (DCON) (Fractional Inch) | 3/16 |
| Shank Diameter (DCON) (mm) | 4.76 |
| Length of Cut (APMX) (Decimal Inch) | 0.1562 |
| Length of Cut (APMX) (Fractional Inch) | 5/32 |
| Length of Cut (APMX) (mm) | 3.97 |
| Reach (LU) (Decimal Inch) | 0.4370 |
| Reach (LU) (mm) | 11.10 |
| Overall Length (LF) (Decimal Inch) | 3.0000 |
|---|---|
| Overall Length (LF) (Fractional Inch) | 3 |
| Overall Length (LF) (mm) | 76.20 |
| Neck Diameter (DN) (Decimal Inch) | 0.1675 |
| Neck Diameter (DN) (mm) | 4.25 |
| Shank Length (LS) (Decimal Inch) | 2.8438 |
| Shank Length (LS) (Fractional Inch) | 2-27/32 |
| Shank Length (LS) (mm) | 72.23 |
| Cutting Diameter (DC) Tolerance (Decimal Inch) | +0.0000/-0.00032 |
| Cutting Diameter (DC) Tolerance (mm) | +0.000/-0.008 |
| Shank Diameter (DCON) Tolerance (ISO) | h6 |
| Shank Type | Straight |
| Weldon Flat | No |
| Coolant Option | External Coolant |
| Coating Description | Bright/Uncoated |
| Additional Geometry | Right Hand Cut Direction (RHC) |
| Rake Angle | Positive |
| Helix Angle | Right Spiral |
| Helix Angle (Degree) | 38 |
| Variable Helix | No |
| Center Cutting | Yes |
| Chip Breaker | No |
Alternative Products SKU / EDP to 32701
3/16" Dia, 3 Flute, Square End End Mill - 32726
SGS 3/16" Dia, 5/32" LOC, 0.4370" Reach, 3/16" Shank Dia, 3 Flute, 38 Degree Helix, Ti-NAMITE-B (TIB2) Coated, Series 43LS, S-Carb, Square End End Mill - 32726
3/16" Dia, 3 Flute, Square End End Mill - 32726
SGS 3/16" Dia, 5/32" LOC, 0.4370" Reach, 3/16" Shank Dia, 3 Flute, 38 Degree Helix, Ti-NAMITE-B (TIB2) Coated, Series 43LS, S-Carb, Square End End Mill - 32726
Product enquiry form
FUTURE CRM FORM HERE
