Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_55CR_Drawing.jpg
Series_55_Logo.png
Series_55_Logo_Vector.eps
Series_55_CR_LG_TA.jpg
https://www.youtube.com/watch?v=-nBE4nJr3aM

1/2" Dia, 5 Flute, Corner Radius End Mill - 32575

SERIES: 55C

V-Carb

1/2" Dia, 1-1/4" LOC, 1/2" Shank Dia, 0.0300" Radius, 5 Flute, 45 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 55C, V-Carb, Corner Radius End Mill - 32575

Feature & Benefits

  • Unequal indexing, high helix and an ideal rake and relief combination for unmatched finishing capability
  • The choice when peak finish quality is the requirement
  • Enhanced corner geometry with tight tolerance corner radii
  • Recommended for materials ≤ 45 HRc (≤ 420 Bhn)

SKU / EDP32575
CategorySolid Round Tools > Milling > High Performance End Mills
Min Order Qty1
Series55C
Series DescriptionV-Carb
High PerformanceYes
End ConfigurationCorner Radius
Tool LengthRegular
Unit (inch/mm)inch
Number of Flutes5
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.5000
Cutting Diameter (DC) (Fractional Inch)1/2
Cutting Diameter (DC) (mm)12.70
Shank Diameter (DCON) (Decimal Inch)0.5000
Shank Diameter (DCON) (Fractional Inch)1/2
Shank Diameter (DCON) (mm)12.70
Length of Cut (APMX) (Decimal Inch)1.2500
Length of Cut (APMX) (Fractional Inch)1-1/4
Length of Cut (APMX) (mm)31.75
Overall Length (LF) (Decimal Inch)3.0000
Overall Length (LF) (Fractional Inch)3
Overall Length (LF) (mm)76.20
Corner Radius (RE) (Decimal Inch)0.0300
Corner Radius (RE) (mm)0.76
Shank Length (LS) (Decimal Inch)1.7500
Shank Length (LS) (Fractional Inch)1-3/4
Shank Length (LS) (mm)44.45
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0020
Corner Radius (RE) Tolerance (mm)+0.000/-0.050
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)45
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 32575
Series_55_CR_LG_W_TA.jpg

1/2" Dia, 5 Flute, Corner Radius End Mill - 32576

SGS 1/2" Dia, 1-1/4" LOC, 1/2" Shank Dia, 0.0300" Radius, 5 Flute, 45 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 55C, V-Carb, Corner Radius End Mill - 32576

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.