Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_24_Drawing.jpg
Series_24_UN.jpg

1/8" Dia, 3 Flute, Tapered (Ball) End Mill - 32408

SERIES: 24B

General Application End Mill

1/8" Dia, 1" LOC, 1/4" Shank Dia, 3 Flute, 28 Degree Helix, Uncoated, Series 24B, Tapered (Ball) End Mill - 32408


SKU / EDP32408
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series24B
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationTapered (Ball)
Tool LengthRegular
Unit (inch/mm)inch
Number of Flutes3
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.1250
Cutting Diameter (DC) (Fractional Inch)1/8
Cutting Diameter (DC) (mm)3.18
Shank Diameter (DCON) (Decimal Inch)0.2500
Shank Diameter (DCON) (Fractional Inch)1/4
Shank Diameter (DCON) (mm)6.35
Length of Cut (APMX) (Decimal Inch)1.0000
Length of Cut (APMX) (Fractional Inch)1
Length of Cut (APMX) (mm)25.40
Overall Length (LF) (Decimal Inch)3.0000
Overall Length (LF) (Fractional Inch)3
Overall Length (LF) (mm)76.20
Tip Radius (RE) (Decimal Inch)0.0625
Tip Radius (RE) (mm)1.59
Shank Length (LS) (Decimal Inch)2.0000
Shank Length (LS) (Fractional Inch)2
Shank Length (LS) (mm)50.80
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0005/-0.0010
Corner Radius (RE) Tolerance (mm)+0.013/-0.025
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionBright/Uncoated
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Side ProfileLinear Taper
Helix AngleRight Spiral
Helix Angle (Degree)28
Variable HelixNo
Center CuttingYes
Chip BreakerNo
Centerline (α) Angle (Degree)3.0

Alternative Products SKU / EDP to 32408
Series_24_TA.png

1/8" Dia, 3 Flute, Tapered (Ball) End Mill - 32473

SGS 1/8" Dia, 1" LOC, 1/4" Shank Dia, 3 Flute, 28 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 24B, Tapered (Ball) End Mill - 32473

Series_24_TC.png

1/8" Dia, 3 Flute, Tapered (Ball) End Mill - 32448

SGS 1/8" Dia, 1" LOC, 1/4" Shank Dia, 3 Flute, 28 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 24B, Tapered (Ball) End Mill - 32448

Series_24_TN.png

1/8" Dia, 3 Flute, Tapered (Ball) End Mill - 32409

SGS 1/8" Dia, 1" LOC, 1/4" Shank Dia, 3 Flute, 28 Degree Helix, Ti-NAMITE (TiN) Coated, Series 24B, Tapered (Ball) End Mill - 32409

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.