Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

3/4" Dia, 2 Flute, Square End End Mill - 32277

SERIES: 59S

General Application End Mill

3/4" Dia, 1-3/8" LOC, 3/4" Shank Dia, 2 Flute, 25 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 59S, Square End End Mill - 32277

SKU / EDP	32277
Category	Solid Round Tools > Milling > General Application End Mills
Min Order Qty	1
Series	59S
Series Description	General Application End Mill
High Performance	No
End Configuration	Square End
Tool Length	Stub
Unit (inch/mm)	inch
Number of Flutes	2
Primary Workpiece Material	(P) Steel\|(M) Stainless Steel\|(K) Cast Iron\|(N) Non-Ferrous Materials\|(S) High Temp Alloy
Secondary Workpiece Material	(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)	0.7500
Cutting Diameter (DC) (Fractional Inch)	3/4
Cutting Diameter (DC) (mm)	19.05
Shank Diameter (DCON) (Decimal Inch)	0.7500
Shank Diameter (DCON) (Fractional Inch)	3/4
Shank Diameter (DCON) (mm)	19.05
Length of Cut (APMX) (Decimal Inch)	1.3750
Length of Cut (APMX) (Fractional Inch)	1-3/8
Length of Cut (APMX) (mm)	34.93

Overall Length (LF) (Decimal Inch)	5.2500
Overall Length (LF) (Fractional Inch)	5-1/4
Overall Length (LF) (mm)	133.35
Shank Length (LS) (Decimal Inch)	3.8750
Shank Length (LS) (Fractional Inch)	3-7/8
Shank Length (LS) (mm)	98.43
Cutting Diameter (DC) Tolerance (Decimal Inch)	+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)	+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)	h6
Shank Type	Straight
Weldon Flat	No
Coolant Option	External Coolant
Coating Description	AlTiN (Ti-NAMITE-A)
Additional Geometry	Right Hand Cut Direction (RHC)
Rake Angle	Positive
Helix Angle	Right Spiral
Helix Angle (Degree)	25
Variable Helix	No
Center Cutting	Yes
Chip Breaker	No