Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_59_59M_Drawing.jpg
Series_59S_TA.png

3/8" Dia, 2 Flute, Square End End Mill - 32274

SERIES: 59S

General Application End Mill

3/8" Dia, 7/8" LOC, 3/8" Shank Dia, 2 Flute, 25 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 59S, Square End End Mill - 32274


SKU / EDP32274
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series59S
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationSquare End
Tool LengthRegular
Unit (inch/mm)inch
Number of Flutes2
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.3750
Cutting Diameter (DC) (Fractional Inch)3/8
Cutting Diameter (DC) (mm)9.53
Shank Diameter (DCON) (Decimal Inch)0.3750
Shank Diameter (DCON) (Fractional Inch)3/8
Shank Diameter (DCON) (mm)9.53
Length of Cut (APMX) (Decimal Inch)0.8750
Length of Cut (APMX) (Fractional Inch)7/8
Length of Cut (APMX) (mm)22.23
Overall Length (LF) (Decimal Inch)4.0000
Overall Length (LF) (Fractional Inch)4
Overall Length (LF) (mm)101.60
Shank Length (LS) (Decimal Inch)3.1250
Shank Length (LS) (Fractional Inch)3-1/8
Shank Length (LS) (mm)79.38
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)25
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 32274
Series_59S_TC.png

3/8" Dia, 2 Flute, Square End End Mill - 32264

SGS 3/8" Dia, 7/8" LOC, 3/8" Shank Dia, 2 Flute, 25 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 59S, Square End End Mill - 32264

Series_59S_TN.png

3/8" Dia, 2 Flute, Square End End Mill - 32284

SGS 3/8" Dia, 7/8" LOC, 3/8" Shank Dia, 2 Flute, 25 Degree Helix, Ti-NAMITE (TiN) Coated, Series 59S, Square End End Mill - 32284

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.