Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_1_1M_Drawing.jpg
Series_1L_TA.png

1" Dia, 4 Flute, Square End End Mill - 31769

SERIES: L1S

General Application End Mill

1" Dia, 2-1/4" LOC, 1" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series L1S, Square End End Mill - 31769


SKU / EDP31769
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
SeriesL1S
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationSquare End
Tool LengthRegular
Unit (inch/mm)inch
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)1.0000
Cutting Diameter (DC) (Fractional Inch)1
Cutting Diameter (DC) (mm)25.40
Shank Diameter (DCON) (Decimal Inch)1.0000
Shank Diameter (DCON) (Fractional Inch)1
Shank Diameter (DCON) (mm)25.40
Length of Cut (APMX) (Decimal Inch)2.2500
Length of Cut (APMX) (Fractional Inch)2-1/4
Length of Cut (APMX) (mm)57.15
Overall Length (LF) (Decimal Inch)5.0000
Overall Length (LF) (Fractional Inch)5
Overall Length (LF) (mm)127.00
Shank Length (LS) (Decimal Inch)2.7500
Shank Length (LS) (Fractional Inch)2-3/4
Shank Length (LS) (mm)69.85
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 31769
Series_1L_TC.png

1" Dia, 4 Flute, Square End End Mill - 31746

SGS 1" Dia, 2-1/4" LOC, 1" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series L1S, Square End End Mill - 31746

Series_1L_TN.png

1" Dia, 4 Flute, Square End End Mill - 31736

SGS 1" Dia, 2-1/4" LOC, 1" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series L1S, Square End End Mill - 31736

Series_1L_UN.jpg

1" Dia, 4 Flute, Square End End Mill - 33117

SGS 1" Dia, 2-1/4" LOC, 1" Shank Dia, 4 Flute, 30 Degree Helix, Uncoated, Series L1S, Square End End Mill - 33117

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.