Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_15_15M_Drawing.jpg
Series_15_UN.jpg

11/64" Dia, 2 Flute, Square End End Mill - 31519

SERIES: 15S

General Application End Mill - Double-End

11/64" Dia, 0.3120" LOC, 3/16" Shank Dia, 2 Flute, 33 Degree Helix, Uncoated, Series 15S, Double-End, Square End End Mill - 31519


SKU / EDP31519
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series15S
Series DescriptionGeneral Application End Mill - Double-End
High PerformanceNo
End ConfigurationSquare End
Tool LengthStub
Unit (inch/mm)inch
Number of Flutes2
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.1719
Cutting Diameter (DC) (Fractional Inch)11/64
Cutting Diameter (DC) (mm)4.37
Shank Diameter (DCON) (Decimal Inch)0.1875
Shank Diameter (DCON) (Fractional Inch)3/16
Shank Diameter (DCON) (mm)4.76
Length of Cut (APMX) (Decimal Inch)0.3120
Length of Cut (APMX) (mm)7.92
Overall Length (LF) (Decimal Inch)2.0000
Overall Length (LF) (Fractional Inch)2
Overall Length (LF) (mm)50.80
Shank Length (LS) (Decimal Inch)1.6880
Shank Length (LS) (mm)42.88
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionBright/Uncoated
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)33
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 31519
Series_15S_TA.png

11/64" Dia, 2 Flute, Square End End Mill - 31325

SGS 11/64" Dia, 0.3120" LOC, 3/16" Shank Dia, 2 Flute, 33 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 15S, Double-End, Square End End Mill - 31325

Series_15S_TC.png

11/64" Dia, 2 Flute, Square End End Mill - 39669

SGS 11/64" Dia, 0.3120" LOC, 3/16" Shank Dia, 2 Flute, 33 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 15S, Double-End, Square End End Mill - 39669

Series_15S_TN.png

11/64" Dia, 2 Flute, Square End End Mill - 31559

SGS 11/64" Dia, 0.3120" LOC, 3/16" Shank Dia, 2 Flute, 33 Degree Helix, Ti-NAMITE (TiN) Coated, Series 15S, Double-End, Square End End Mill - 31559

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.