Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_14_14M_Drawing.jpg
Series_14_UN.jpg

3/8" Dia, 4 Flute, Square End End Mill - 31435

SERIES: 14S

General Application End Mill - Double-End

3/8" Dia, 0.5620" LOC, 3/8" Shank Dia, 4 Flute, 30 Degree Helix, Uncoated, Series 14S, Double-End, Square End End Mill - 31435


SKU / EDP31435
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series14S
Series DescriptionGeneral Application End Mill - Double-End
High PerformanceNo
End ConfigurationSquare End
Tool LengthStub
Unit (inch/mm)inch
Number of Flutes4
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.3750
Cutting Diameter (DC) (Fractional Inch)3/8
Cutting Diameter (DC) (mm)9.53
Shank Diameter (DCON) (Decimal Inch)0.3750
Shank Diameter (DCON) (Fractional Inch)3/8
Shank Diameter (DCON) (mm)9.53
Length of Cut (APMX) (Decimal Inch)0.5620
Length of Cut (APMX) (mm)14.27
Overall Length (LF) (Decimal Inch)2.5000
Overall Length (LF) (Fractional Inch)2-1/2
Overall Length (LF) (mm)63.50
Shank Length (LS) (Decimal Inch)1.9380
Shank Length (LS) (mm)49.23
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionBright/Uncoated
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 31435
Series_14S_TA.png

3/8" Dia, 4 Flute, Square End End Mill - 31187

SGS 3/8" Dia, 0.5620" LOC, 3/8" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 14S, Double-End, Square End End Mill - 31187

Series_14S_TC.png

3/8" Dia, 4 Flute, Square End End Mill - 39635

SGS 3/8" Dia, 0.5620" LOC, 3/8" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 14S, Double-End, Square End End Mill - 39635

Series_14S_TN.png

3/8" Dia, 4 Flute, Square End End Mill - 31475

SGS 3/8" Dia, 0.5620" LOC, 3/8" Shank Dia, 4 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series 14S, Double-End, Square End End Mill - 31475

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.