Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_15_15M_Drawing.jpg
Series_15S_TA.png

9/32" Dia, 2 Flute, Square End End Mill - 31331

SERIES: 15S

General Application End Mill - Double-End

9/32" Dia, 1/2" LOC, 5/16" Shank Dia, 2 Flute, 35 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 15S, Double-End, Square End End Mill - 31331


SKU / EDP31331
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series15S
Series DescriptionGeneral Application End Mill - Double-End
High PerformanceNo
End ConfigurationSquare End
Tool LengthStub
Unit (inch/mm)inch
Number of Flutes2
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.2812
Cutting Diameter (DC) (Fractional Inch)9/32
Cutting Diameter (DC) (mm)7.14
Shank Diameter (DCON) (Decimal Inch)0.3125
Shank Diameter (DCON) (Fractional Inch)5/16
Shank Diameter (DCON) (mm)7.94
Length of Cut (APMX) (Decimal Inch)0.5000
Length of Cut (APMX) (Fractional Inch)1/2
Length of Cut (APMX) (mm)12.70
Overall Length (LF) (Decimal Inch)2.5000
Overall Length (LF) (Fractional Inch)2-1/2
Overall Length (LF) (mm)63.50
Shank Length (LS) (Decimal Inch)2.0000
Shank Length (LS) (Fractional Inch)2
Shank Length (LS) (mm)50.80
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)35
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 31331
Series_15S_TC.png

9/32" Dia, 2 Flute, Square End End Mill - 39681

SGS 9/32" Dia, 1/2" LOC, 5/16" Shank Dia, 2 Flute, 35 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 15S, Double-End, Square End End Mill - 39681

Series_15S_TN.png

9/32" Dia, 2 Flute, Square End End Mill - 31571

SGS 9/32" Dia, 1/2" LOC, 5/16" Shank Dia, 2 Flute, 35 Degree Helix, Ti-NAMITE (TiN) Coated, Series 15S, Double-End, Square End End Mill - 31571

Series_15_UN.jpg

9/32" Dia, 2 Flute, Square End End Mill - 31531

SGS 9/32" Dia, 1/2" LOC, 5/16" Shank Dia, 2 Flute, 35 Degree Helix, Uncoated, Series 15S, Double-End, Square End End Mill - 31531

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.