Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_17_17M_Drawing.jpg
Series_17_TC.png

7/16" Dia, 2 Flute, Square End End Mill - 31312

SERIES: 17S

General Application End Mill

7/16" Dia, 5/8" LOC, 7/16" Shank Dia, 2 Flute, 32 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 17S, Square End End Mill - 31312


SKU / EDP31312
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series17S
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationSquare End
Tool LengthStub
Unit (inch/mm)inch
Number of Flutes2
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)0.4375
Cutting Diameter (DC) (Fractional Inch)7/16
Cutting Diameter (DC) (mm)11.11
Shank Diameter (DCON) (Decimal Inch)0.4375
Shank Diameter (DCON) (Fractional Inch)7/16
Shank Diameter (DCON) (mm)11.11
Length of Cut (APMX) (Decimal Inch)0.6250
Length of Cut (APMX) (Fractional Inch)5/8
Length of Cut (APMX) (mm)15.88
Overall Length (LF) (Decimal Inch)2.5000
Overall Length (LF) (Fractional Inch)2-1/2
Overall Length (LF) (mm)63.50
Shank Length (LS) (Decimal Inch)1.8750
Shank Length (LS) (Fractional Inch)1-7/8
Shank Length (LS) (mm)47.63
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTiCN (Ti-NAMITE-C)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)32
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 31312
Series_17_TA.png

7/16" Dia, 2 Flute, Square End End Mill - 31367

SGS 7/16" Dia, 5/8" LOC, 7/16" Shank Dia, 2 Flute, 32 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 17S, Square End End Mill - 31367

Series_17_TN.png

7/16" Dia, 2 Flute, Square End End Mill - 31759

SGS 7/16" Dia, 5/8" LOC, 7/16" Shank Dia, 2 Flute, 32 Degree Helix, Ti-NAMITE (TiN) Coated, Series 17S, Square End End Mill - 31759

Series_17_UN.jpg

7/16" Dia, 2 Flute, Square End End Mill - 31719

SGS 7/16" Dia, 5/8" LOC, 7/16" Shank Dia, 2 Flute, 32 Degree Helix, Uncoated, Series 17S, Square End End Mill - 31719

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.