Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_5B_5MB_Drawing.jpg
Series_5B_TN.png

1" Dia, 3 Flute, Ball Nose End Mill - 30888

SERIES: 05B

General Application End Mill

1" Dia, 1-1/2" LOC, 1" Shank Dia, 3 Flute, 30 Degree Helix, Ti-NAMITE (TiN) Coated, Series 05B, Ball Nose End Mill - 30888


SKU / EDP30888
CategorySolid Round Tools > Milling > General Application End Mills
Min Order Qty1
Series05B
Series DescriptionGeneral Application End Mill
High PerformanceNo
End ConfigurationBall Nose
Tool LengthStub
Unit (inch/mm)inch
Number of Flutes3
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
Cutting Diameter (DC) (Decimal Inch)1.0000
Cutting Diameter (DC) (Fractional Inch)1
Cutting Diameter (DC) (mm)25.40
Shank Diameter (DCON) (Decimal Inch)1.0000
Shank Diameter (DCON) (Fractional Inch)1
Shank Diameter (DCON) (mm)25.40
Length of Cut (APMX) (Decimal Inch)1.5000
Length of Cut (APMX) (Fractional Inch)1-1/2
Length of Cut (APMX) (mm)38.10
Overall Length (LF) (Decimal Inch)4.0000
Overall Length (LF) (Fractional Inch)4
Overall Length (LF) (mm)101.60
Shank Length (LS) (Decimal Inch)2.5000
Shank Length (LS) (Fractional Inch)2-1/2
Shank Length (LS) (mm)63.50
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0020
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.050
Shank Diameter (DCON) Tolerance (ISO)h6
Corner Radius (RE) Tolerance (Decimal Inch)+0.0000/-0.0010
Corner Radius (RE) Tolerance (mm)+0.000/-0.025
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionTiN (Ti-NAMITE)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 30888
Series_5B_TA.png

1" Dia, 3 Flute, Ball Nose End Mill - 31167

SGS 1" Dia, 1-1/2" LOC, 1" Shank Dia, 3 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series 05B, Ball Nose End Mill - 31167

Series_5B_TC.png

1" Dia, 3 Flute, Ball Nose End Mill - 30942

SGS 1" Dia, 1-1/2" LOC, 1" Shank Dia, 3 Flute, 30 Degree Helix, Ti-NAMITE-C (TiCN) Coated, Series 05B, Ball Nose End Mill - 30942

Series_5B_UN.jpg

1" Dia, 3 Flute, Ball Nose End Mill - 30576

SGS 1" Dia, 1-1/2" LOC, 1" Shank Dia, 3 Flute, 30 Degree Helix, Uncoated, Series 05B, Ball Nose End Mill - 30576

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.