Product Browser

If you know the SKU/EDP of the product you are looking for, please use the search below otherwise use our Digital Product Finder to find a product that suits your needs.

Enter a Product SKU/EDP
Series_M3_Drawing.jpg
M3_TA.png

0.1100" Dia, 3 Flute, Square End End Mill - 01153

SERIES: M3S

Micro End Mill

0.1100" Dia, 0.1650" LOC, 1/8" Shank Dia, 3 Flute, 30 Degree Helix, Ti-NAMITE-A (AlTiN) Coated, Series M3S, Micro, Square End End Mill - 01153

Feature & Benefits

  • Three flute design features improved chip space over four flutes and increased strength and feed capability over two flutes
  • Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds
  • High performance carbide substrate designed specifically for Micro Tool applications
  • Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality
  • Manufactured in accordance with KSPT ISO certified quality procedures

SKU / EDP01153
CategorySolid Round Tools > Milling > Micro End Mills
Min Order Qty1
SeriesM3S
Series DescriptionMicro End Mill
High PerformanceNo
End ConfigurationSquare End
Tool LengthStub
Unit (inch/mm)inch
Number of Flutes3
Primary Workpiece Material(P) Steel|(M) Stainless Steel|(K) Cast Iron|(N) Non-Ferrous Materials|(S) High Temp Alloy
Secondary Workpiece Material(H) Hardened Materials
LOC (xD)1.5xD
Cutting Diameter (DC) (Decimal Inch)0.1100
Cutting Diameter (DC) (mm)2.79
Shank Diameter (DCON) (Decimal Inch)0.1250
Shank Diameter (DCON) (Fractional Inch)1/8
Shank Diameter (DCON) (mm)3.18
Length of Cut (APMX) (Decimal Inch)0.1650
Length of Cut (APMX) (mm)4.19
Overall Length (LF) (Decimal Inch)1.5000
Overall Length (LF) (Fractional Inch)1-1/2
Overall Length (LF) (mm)38.10
Shank Length (LS) (Decimal Inch)1.3350
Shank Length (LS) (mm)33.91
Cutting Diameter (DC) Tolerance (Decimal Inch)+0.0000/-0.0010
Cutting Diameter (DC) Tolerance (mm)+0.000/-0.025
Shank Diameter (DCON) Tolerance (ISO)h6
Shank TypeStraight
Weldon FlatNo
Coolant OptionExternal Coolant
Coating DescriptionAlTiN (Ti-NAMITE-A)
Additional GeometryRight Hand Cut Direction (RHC)
Rake AnglePositive
Profile Angle (Degree)15
Helix AngleRight Spiral
Helix Angle (Degree)30
Variable HelixNo
Center CuttingYes
Chip BreakerNo

Alternative Products SKU / EDP to 01153
Series_M3M3CR_15XD_UN.png

0.1100" Dia, 3 Flute, Square End End Mill - 04108

SGS 0.1100" Dia, 0.1650" LOC, 1/8" Shank Dia, 3 Flute, 30 Degree Helix, Uncoated, Series M3S, Micro, Square End End Mill - 04108

Product enquiry form

FUTURE CRM FORM HERE

Loading, please wait.